Chlorinated Polyvinyl Chloride (CPVC) pipe and fittings are used within buildings for potable hot and cold water distribution from the water meter to fixtures.

 

  • Outside diameters are the same as copper tube. (CTS = Copper Tube Size)
  • CPVC systems are accepted by all major model building codes
  • Carded (c) parts contain bar code and installation instructions.
  • CPVC tubing is rated at 210° for water heater relief valve drain applications.
  • Solvent weld joints.

 

CPVC PIPE & FITTINGS

CPVC Tubing and Fitting Systems:

  • Meets ASTM D2846
  • Rated for 400 PS! @ 73°F & 100 PSI @ 180°F
  • NSF Listed

No Lead CPVC Fittings:

  • Product certified to NSF Standard 61, Annex G
  • Weighted Average Lead Content of ≤0.25%

 

CPVC Pipe

(Note: Be sure to order by the length and not by the foot.)

Part #
Size Inner Bundle Lengths
Bundle Qty Lengths
Skid Qty Lengths
Bundle Weight
50005 1/2" x 10'
10 100 1000 9
50025 1/2" x 5'
10 100 1000 4
50007 3/4" x 10'
10 50 500 15
50035 3/4" x 5'
10 50 500 7
560010 1" x 10'
5 480 12
Used to join straight lengths of CPVC tubing.

Coupling (SLIP x SLIP)

Used to join straight lengths of CPVC tubing.

Part #
Size Pkg Qty
Box Qty
Box Weight
50105 1/2" 20 500 9
50107 3/4" 20 260 9
50110 1" 10 100 7
50114 1 1/4"
10 100 10
50115 1 1/2"
10 50 9
50120 2" 5 25 9
Used to join straight lengths of CPVC tubing.

Coupling (SLIP x SLIP) Contractor Pack

Conveniently packaged in quantities of 10.

Part #
Size Box Qty
Box Weight
50105CP 1/2" 50 9
50107CP 3/4" 25 8
Used to join straight lengths of CPVC tubing. Reduces to smaller size tubing.

Reducing Coupling (SLIP x SLIP)

Used to join straight lengths of CPVC tubing. Reduces to smaller size tubing.

Part #
Size Pkg Qty
Box Qty
Box Weight
50175 3/4" x 1/2"
10 500 13
50117 1" x 3/4"
10 100 5
Used to permanently or temporarily cap CPVC tubing.

Cap (SLIP)

Used to permanently or temporarily cap CPVC tubing.

Part #
Size Pkg Qty
Box Qty
Box Weight
50155 1/2" 10 500 6
50157 3/4" 10 250 6
50158 1" 10 100 5
50159 1 1/4"
10 100 7
50151 1 1/2"
10 50 6
50152 2" 5 25 6
Used to reduce from fitting socket to CPVC tubing.

Reducing Bushing (SPIGOT x SLIP)

Used to reduce from fitting socket to CPVC tubing.

Part #
Size Pkg Qty
Box Qty
Box Weight
50275 3/4" x 1/2"
10 500 9
50215 1" x 1/2"
10 100 4
50217 1" x 3/4"
10 100 3
50245 1 1/4" x 1/2"
10 100 6
50247 1 1/4" x 3/4"
10 100 6
50240 1 1/4" x 1"
10 100 5
50257 1 1/2" x 3/4"
10 100 10
50250 1 1/2" x 1"
10 100 9
50254 1 1/2" x 1 1/4"
10 100 7
50227 2" x 3/4"
10 50 9
50220 2" x 1"
10 100 18
50224 2" x 1 1/4"
10 50 10
50221 2" x 1 1/2"
10 50 8
Used in COLD WATER APPLICATIONS ONLY to adapt from a PVC fitting socket to CPVC tubing.

PVC to CPVC Bushing (IPS SPIGOT x CTS SLIP)

Used in COLD WATER APPLICATIONS ONLY to adapt from a PVC fitting socket to CPVC tubing.

Part #
Size Pkg Qty
Box Qty
Box Weight
55305 1/2" 10 200 4
55307 3/4" 10 200 5
55310 1" 10 100 4
55314 1 1/4"
5 25 2
55315 1 1/2"
5 25 2
55320 2" 5 25 3
Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leakproof seal.

Special Female Adapter (SLIP x FIP)

Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leakproof seal. Hand-tighten only! This fitting seals by means of a gasket.  The use of joint compound or PTFE tape is neither necessary or recommended.

Part #
Size Pkg Qty
Box Qty
Box Weight
50305 1/2" 20 500 17
50307 3/4" 10 250 11
50310 1" 10 100 9
Used to adapt female pipe threads to CPVC tubing in COLD WATER APPLICATIONS ONLY!

Male Adapter (MIP x SLIP)

Used to adapt female pipe threads to CPVC tubing in COLD WATER APPLICATIONS ONLY! Where hot water or changing water temperatures are likely to be encountered, utilize the recommended TRANSITION UNIONS. PTFE thread tape is the accepted method of sealing pipe threads on CPVC fittings. Do not use other materials or compounds unless specifically approved by the manufacturer.

Part #
Size Pkg Qty
Box Qty
Box Weight
50405 1/2" 20 500 12
50407 3/4" 10 250 12
50410 1" 10 100 7
50414 1 1/4"
10 50 5
50415 1 1/2"
10 50 8
50420 2" 5 25 9
50475 1/2" x 3/4"
10 250 9
Conveniently packaged in quantities of 10.

Male Adapter (MIP x SLIP) Contractor Pack

Conveniently packaged in quantities of 10.

Part #
Size Box Qty
Box Weight
50405CP 1/2" 50 11
50407CP 3/4" 25 12

Riser Adapter (MIP x SLIP)

Connects to all flexible supply lines and solvent welds onto CPVC pipe.

Part #
Size Pkg Qty
Box Qty
Box Weight
50455 1/2" 20 500 14
Used in COLD WATER APPLICATIONS ONLY to adapt from CPVC pipe to PVC pipe.

PVC to CPVC Adapter (IPS SLIP x CTS SLIP)

Used in COLD WATER APPLICATIONS ONLY to adapt from CPVC pipe to PVC pipe.

Part #
Size Pkg Qty
Box Qty
Box Weight
51577 3/4" 25 250 9
Used to change direction in piping. Sometimes used in conjunction with a 12” length of CPVC tubing on long runs to absorb expansion.

45° Elbow (SLIP x SLIP)

Used to change direction in piping. Sometimes used in conjunction with a 12” length of CPVC tubing on long runs to absorb expansion.

Part #
Size Pkg Qty
Box Qty
Box Weight
50605 1/2" 20 500 11
50607 3/4" 20 260 10
50610 1" 10 50 4
50614 1 1/4"
10 50 6
50615 1 1/2"
10 50 10
50620 2" 5 25 11
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45° elbows.

45° Street Elbow (SLIP x SPIGOT)

Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45° elbows. A principal use is to offset piping over and around existing piping mounted on flat surfaces such as wall or ceiling.

Part #
Size Pkg Qty
Box Qty
Box Weight
52705 1/2" 20 500 14
52707 3/4" 20 260 13
Used to change direction in piping.

90° Elbow (SLIP x SIP)

Used to change direction in piping.

Part #
Size Pkg Qty
Box Qty
Box Weight
50705 1/2" 20 500 14
50707 3/4" 20 260 15
50710 1" 10 100 10
50714 1 1/4"
10 100 15
50715 1 1/2"
10 50 13
50720 2" 5 25 14
Conveniently packaged in quantities of 10.

90° Elbow (SLIP x SLIP) Contractor Pack

Conveniently packaged in quantities of 10.

Part #
Size Box Qty
Box Weight
50705CP 1/2" 50 14
50707CP 3/4" 25 14
Used to change direction in piping. This elbow can also be used as a ¾” Street Elbow.

Reducing 90° Elbow (SLIP x SLIP)

Used to change direction in piping. This elbow can also be used as a ¾” Street Elbow.

Part #
Size Pkg Qty
Box Qty
Box Weight
50775 3/4" x 1/2"
10 250 16
Used to change direction in piping 90° from a fitting socket. The ¾” Elbow (Part #52907) can also be used as a ¾” x ½” reducing elbow.

90° Street Elbow (SLIP x SPIGOT)

Used to change direction in piping 90° from a fitting socket. The ¾” Elbow (Part #52907) can also be used as a ¾” x ½” reducing elbow.

Part #
Size Pkg Qty
Box Qty
Box Weight
52905 1/2" 10 500 16
52907 3/4" 10 250 16
Used to provide a branch supply line from a main line.

Tee (SLIP x SLIP x SLIP)

Used to provide a branch supply line from a main line.

Part #
Size Pkg Qty
Box Qty
Box Weight
51405 1/2" 20 500 17
51407 3/4" 20 260 19
51410 1" 10 100 12
51414 1 1/4"
10 50 10
51415 1 1/2"
5 25 8
51420 2" 5 25 17
Conveniently packaged in quantities of 10.

Tee (SLIP x SLIP x SLIP) Contractor Pack

Conveniently packaged in quantities of 10.

Part #
Size Box Qty
Box Weight
51405CP 1/2" 50 17
51407CP 3/4" 25 19

P    800–521–7488

F     8107441653

 

 

Genova Products, Inc. World Headquarters

7034 E Court St

Box 309

Davison, MI 48423-0309

Copyright 2016 Genova Products, Inc. All Rights reserved.

customer service icon

Submitting Form...

The server encountered an error.

Form received.

Used to join straight lengths of CPVC tubing.
Used to join straight lengths of CPVC tubing.
Used to join straight lengths of CPVC tubing. Reduces to smaller size tubing.
Used to permanently or temporarily cap CPVC tubing.
Used to reduce from fitting socket to CPVC tubing.
Used in COLD WATER APPLICATIONS ONLY to adapt from a PVC fitting socket to CPVC tubing.
Used to adapt to male pipe threads to CPVC tubing. A special elastomeric gasket ensures a leakproof seal.
Used to adapt female pipe threads to CPVC tubing in COLD WATER APPLICATIONS ONLY!
Conveniently packaged in quantities of 10.
Used in COLD WATER APPLICATIONS ONLY to adapt from CPVC pipe to PVC pipe.
Used to change direction in piping. Sometimes used in conjunction with a 12” length of CPVC tubing on long runs to absorb expansion.
Used on close offsets where very short pieces of CPVC pipe would otherwise have to be used with conventional 45° elbows.
Used to change direction in piping.
Conveniently packaged in quantities of 10.
Used to change direction in piping. This elbow can also be used as a ¾” Street Elbow.
Used to change direction in piping 90° from a fitting socket. The ¾” Elbow (Part #52907) can also be used as a ¾” x ½” reducing elbow.
Used to provide a branch supply line from a main line.
Conveniently packaged in quantities of 10.

P     800–521–7488

F     8107441653

 

 

Genova Products, Inc.

7034 E Court St

Box 309

Davison, MI 48423-0309

customer service icon
customer service icon

inquiry@genovaproducts.com

P    800–521–7488

F    8107441653

Genova Products, Inc.

7034 E Court St

Box 309

Davison, MI 48423-0309